Machine Features:

 

• Low maintenance.Closed loop structure for low electrical noise(patent).
• Untouched sensor and SCR system keep durable and low noise.
• For added protection,the electrical components are located on the top of the machine.
• Reduced vibration and improved accuracy are achieved using a five phase motor.
• International standard components are uniformly used where possible,providing the user the option to source spare parts locally,spare parts are interchangeable.
• The use of superior materrials and components(superior cast iron,linear slides and ball screws)ensure high rigidity,accuracy,and durability.
• Multiple wire speeds for different cutting parameters and ease of wire installation.
• The machine has been designed specifically to meet the needs of press and plastics tooling applications.

Control System Features:

• PC Based industrial computer utilising EPROM technology for improved reliability and systems protection.
• Two central processing units(CPU) to enable programming while cutting.
• Graphical gap voltage display(patent)
• Graphical programming system including such features as:mirror,move,rotate,divide,scale,zoom,line,circle,radii,standard/special
• curve,gear,tangent of line and circle,trim,clear,off-set and smooth radius.,
• Can accept DXF or G-Code from AutoCAD and other major CAD/CAM systems via floppy disk.
• Optional scanning software or full scanning system available.
• Programmable taper of up to 60 degrees.
• Four-axis synthesis(different profile top to bottom).
• 2D or 3D cutting
• simulation and real time machining trace.
• Edge finding and auto centring.
• Invert cutting(Invert the cutting path).
• Initiate start point(can return to initial start hole position while wire broken).
• Auto Back-off and manual Back-off or go back to last point,then resume cutting.
• Pause cutting.Restart cutting.
• System can memorises the point on the cutting path when an error occurs or when there is a wire breakage.It then can resume cutting from that point when the error is rectified.
• Battery back up.Complete data relention.
• Auto programming for jumping mold.
• Graphically check any segment of the programmed path with the ZOOM function.
• Auto reset of UV axis when the job is completed.
• International G-Codes.switch between graphics and G-Code easily.
• No load output voltage:105V.
• The pulse width Ton:2,4,8,16,32,64,128μs.
• Max. short-circuit current>8A.
• Dimension of controller:600*600*1750mm

Other specifications:
Max. cutting speed:100mm²/min.
Optimum furface finish:Ra>2.0μm.
wire diameter:ф0.12~0.22mm
wire speed:4 levels adjustable
Dielectric solution:oil NG-1(1:20),Dielectric soap NG-1(1:20~25)
Max. working current:6A.
Power supply:1-N 50Hz/60Hz,220VAC or 3-N 50Hz,380VAC
Power consumption:less than 1.2KVA